AD843JN Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . As long as the supply current of the chip does not exceed 12mA, this op amp ic can operate. There should be no change in the voltage gain at 87.96dB. The linear amplifier consists of 1 different elements in total. There is an 12mA quiescent current running through op amp ic.
AD843JN Features
8 Pins
supply voltage of 15V
87.96dB voltage gain
AD843JN Applications
There are a lot of Analog Devices Inc. AD843JN Instrumentational OP Amps applications.
- Strain gauges
- Weighing systems
- Instrumentation
- Active probe
- Multimedia playback equipment
- Test equipment
- Measurements of Wheatstone bridge
- Medical instruments
- Multiplication circuits
- Signal filtering
