LT1362CN#PBF Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. A Voltage Feedback-type buffer amplifier is shown here. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. We are approaching the 14h termination of the year. A total of 14 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 300μV voltage. This electrical part should be mounted using type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. As long as the supply current of the chip does not exceed 4mA, this op amp ic can operate. There should be no change in the voltage gain at 76.12dB. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. C-Load? corresponds to linear amplifier's series.
LT1362CN#PBF Features
14 Pins
supply voltage of 5V
76.12dB voltage gain
LT1362CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1362CN#PBF Instrumentational OP Amps applications.
- Band-stop filter
- Information processing
- Semiconductor detectors
- Automatic control
- Non-polarized electrodes
- Displayers for aircraft and air transportation control systems
- pH (acidity)
- Wireless base stations
- Thermocouples
- Scintillation detectors
