AD822BR Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. Op amp ic rates 1.5mV for input offset voltage. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 1.8mA . It is recommended to keep the voltage gain at 120dB at all times. There are 2 channels on the operational amplifiers. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The current is quiescent at 900μA.
AD822BR Features
8 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
AD822BR Applications
There are a lot of Analog Devices Inc. AD822BR Instrumentational OP Amps applications.
- Signal operation
- RF cable systems
- Precision measurement
- Weak signal detection
- Multiplication circuits
- Medical instruments
- single/dual op amp sum and difference circuits
- Switching amplifier
- High-frequency data acquisition systems
- Band-stop filter
