AD660ANZ Overview
In the 24-DIP (0.300, 7.62mm) package, you will find it. In order to operate it, a voltage supply of 15V volts is required. Part of the Other Converters family, this FPGA part is a programmable gate array. With a Through Hole connector, this FPGA module can be attached to the development board. The DACPORT? Series is one of the types of FPGAs that belong to this type. As far as the operating temperature is concerned, it should be kept within -40°C~85°C when operating. It is for space saving reasons that this FPGA model is contained in Tube. The total number of terminations is 24. Parts related to this part can be found using its base part number AD660. 24 pins are designed into the device. In my opinion, this FPGA could produce fantastic results if mounted in Through Hole, provided that its specifications are followed. There are a total of 24 pins on this device. It can take a maximum of 16.5V as the supply voltage. As long as the supply voltage is at least 13.5V, it is able to work properly.
AD660ANZ Features
24-DIP (0.300, 7.62mm) package
24 pin count
24 pins
Minimal input voltage of 5V
DACPORT? series
AD660ANZ Applications
There are a lot of Analog Devices Inc. AD660ANZ Digital to Analog Converters (DAC)?applications.
- Basestations
- Microprocessor Controlled Calibration
- Microprocessor Controlled Circuits
- Closed-loop process control
- LMDS/MMDS, point-to-point
- Portable Equipment
- Function Generators
- Data Distribution System
- Synchro Applications
- Software Radio
