AD537SD/883B Overview
As part of the 14-CDIP (0.300, 7.62mm) package, it is embedded. The electronic part is located in the direction of Through Hole. There is a package in the way of Tube. Voltage to Frequency is the type of this electrical device. As a matter of fact, there are 14 terminations, which involve terminating a transmission line with a device which matches its characteristic impedance. 14 pins are equipped with this device. The device is powered by a supply voltage of 15V. It is possible to locate related parts based on the base part number. When a computer or other communication device is attached to a signal interface, there are 14 pins, which are pronged contacts. Consequently, it operates at a minimum operating temperature of -55°C to ensure its reliability. As a result, it operates at a maximum operating temperature of 125°C to ensure its reliability. In Through Hole, it is mounted. In order to ensure proper operation, the supply voltage (Vsup) should be greater than 4.5V. The maximum supply voltage (Vsup) reaches 36V. With a maximum frequency of 100kHz, it operates. In order for 2.5mA to function properly, a sufficient supply current must be provided. Input type 11V is the maximum for this electronic part. There is a maximum operating frequency of 0.15MHz for this device. In this electrical device, the reference voltage is 1V. There is also a characteristic IT CAN ALSO OPERATE FROM A +/-5V TO +/-18V SUPPLY associated with it.
AD537SD/883B Features
14-CDIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
The maximal operating frequency of 0.15MHz
AD537SD/883B Applications
There are a lot of Analog Devices Inc.
AD537SD/883B V/F & F/V Converters applications.
- Hand-Held Tachometers
- Speed Governors
- Cruise Control
- Automotive Door L ock Control
- Clutch Control
- Horn Control
- Touch or Sound Switches
- lsolation of High Common-Mode Voltages
- Low-Cost Analog-to-Digital Conversion
- Battery Monitoring
