ACS723KMATR-20AB-T Overview
The current sensors are put into 16-SOIC (0.295, 7.50mm Width) packages for safety protection. These current sensors are packaged in the Tape & Reel (TR) to protect the devices from damage. The current supplied by current sensors should not be higher than 14mA. The current sensors have 16 terminations. There are 16 pins in this current sensor. These current sensors can supply a voltage of 5V while working. The minimum voltage supplied by current sensors should be set to 4.5V. But the voltage supplied by current sensors should not exceed 5.5V.
ACS723KMATR-20AB-T Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 4.5V~5.5V
Frequency: DC~80kHz
Sensing Current: 20A
16-SOIC (0.295, 7.50mm Width) Package
ACS723KMATR-20AB-T Applications
There are a lot of Allegro MicroSystems
ACS723KMATR-20AB-T Current Sensors applications.
- Motor and load control
- Inverter and H-bridge current measurements
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
