CSDC1BA Overview
Safety measures are taken to protect the current sensors by putting them in Module, Single Pass Through packages. For protection, these sensors are packaged in the Bulk. Current sensors should only output 12mA current. A current sensor's supply current should not exceed 12mA. If these current sensors are to function, their operating temperatures cannot be lower than -25°C. The current sensors should remain at 85°C for the maximum operating temperature. A 12mA current sensor has been designed for a 12mA current. Sensors that supply current should supply 88mA current nominally. In the case of current sensors, the voltage output should be 400mV. The voltage supplied by these sensors cannot fall below 6V in a DC circuit. It is important, however, that the voltage supplied by the current sensors does not exceed 16V in the DC circuit.
CSDC1BA Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Current Switch
Supply Voltage: 5V
Sensing Current: 1A
Module, Single Pass Through Package
CSDC1BA Applications
There are a lot of Honeywell Sensing and Productivity Solutions
CSDC1BA Current Sensors applications.
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
- General purpose inverters
- AC variable speed drives
- Static converters for DC motor drives
- Battery supplied applications
- Uninterruptible Power Supplies(UPS)
- Switched Mode Power Supplies(SMPS)
- Power supplies for welding applications
