ALD4211PCL Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Through Hole. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. A SPST - NC switching circuit is used for these analog switches. A 4 circuit is present in this switch device. In this multiplexer, the internal resistance is 135Ohm. Please refer to the datasheets for 16 pins functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. 3V should be the lowest voltage fed to the electronic component. Putting voltage greater than 1μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 6V. In an environment with a temperature higher than 85°C, the digital switches should not operate. Suppliers offer a package with 16-PDIP.
ALD4211PCL Features
Switch Circuit: SPST - NC
ALD4211PCL Applications
There are a lot of Advanced Linear Devices Inc. ALD4211PCL Analog Switches & Multiplexers ICs applications.
- Imaging
- Data Acquisition Systems
- Multiplexers
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- DVD-R
- Microprocessor Controlled Analog Systems
- Relay replacements
- Data switching
- SDH/SONET multiplexers
- High speed data transmission line cards
