ALD2704APAL Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. A Tube case is used for delivering the op amp. It has 8 pins that make up the linear amplifier. Op amp ic rates 1mV for input offset voltage. For this electrical component, Through Hole is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. You can run this op amp ic on 5mA . There should be no change in the voltage gain at 100dB. There are 2 circuits on op amps. 2 channels are available on the instrumentation amplifier. This op amp ic outputs Push-Pull, Rail-to-Rail signals, which is one of the many benefits it has. The temperature should not be lower than 0°C for operational amplifier ics to operate. At temperatures greater than 70°C, op amp should not be used. The operating supply voltage of the buffer op amp is rated at 5V. There is a recommendation that this electrical part be used with a supply with 5mA current rating. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 6V volts.
ALD2704APAL Features
100dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
ALD2704APAL Applications
There are a lot of Advanced Linear Devices Inc. ALD2704APAL Instrumentational OP Amps applications.
- Information processing
- Industrial control system
- Micro signal measurement
- Video amplifiers
- earphone
- Addition operation circuits
- Exponential operation circuits
- ECG equipment
- Tablets
- Radar
