INA141U/2K5 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Op amps are Instrumentation types of amplifier on the chip. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 50μV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 750μA, this op amp ic can operate. This op amp contains 1 circuits. A voltage rating of 3 is indicated for the op amp's operating supply voltage. This linear amplifier pack is based on the TR axis. The quiescent current is 750μA. There are a maximum of 10 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. The op amp resistance should stay within the range of 10GOhm.
INA141U/2K5 Features
8 Pins
supply voltage of 15V
Resistance of 10GOhm
INA141U/2K5 Applications
There are a lot of Texas Instruments INA141U/2K5 Instrumentational OP Amps applications.
- Home audio systems
- High gain DC amplifier
- Automation control systems
- Large motor controllers
- Comparator
- Digital cameras
- High-frequency data acquisition systems
- Scintillation detectors
- Integrator circuits
- Blood pressure sensors
