ALD2332SAL Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, NMOS, Push-Pull, TTL output on this device.The chip is packaged with Tube .Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .This comparator has 8 pins.A quiescent current of 500μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 500μA supply current.If the current supply exceeds 500μA , the comparator might be damaged.The voltage formula shows that the part has a voltage gain of 103.52dB .To maintain output quality, 3 channels cooperate.The part is based on EPAD® .
ALD2332SAL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 500μA
Voltage Gain: 103.52dB
ALD2332SAL Applications
There are a lot of Advanced Linear Devices Inc.
ALD2332SAL linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
