ALD2303APAL Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.Output type of this comparator is CMOS, NMOS, Open-Drain, TTL .The part is shipped by Tube .This is a typical comparator of type General Purpose .Currently, it consists of only 2 elements.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.8 pins are available on the comparator.A quiescent current of 40μA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 40μA .An excess of current supply over 40μA could result in malfunction of the comparator.There is no recommendation for temperatures higher than 70°C .Temperatures below 0°C are not suitable for the device.Compatibility is defined as 12V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 3V is allowed for this comparator.The output quality of 2 channels is maintained by cooperating with each other.
ALD2303APAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 40μA
ALD2303APAL Applications
There are a lot of Advanced Linear Devices Inc.
ALD2303APAL linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
