MAX944EPD+ Overview
In order to make transportation easier, it is packaged in 14-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, Push-Pull, TTL is being used.We ship the part through Tube .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.In general, the chip type can be classified as General Purpose .A total of 4 elements can be found in it.A total of 14 pins are included.A Through Hole mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 14 pins.Alternatively, you may search for MAX944 to find more pin-to-pin solutions for your specific needs.There is 600μA current flowing in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 500μA .A current supply greater than 500μA may cause the comparator to malfunction.The device can be run with 3/5V power supplies.
MAX944EPD+ Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 600μA
MAX944EPD+ Applications
There are a lot of Maxim Integrated
MAX944EPD+ linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
