ALD2301CSAL Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type CMOS, NMOS, Open-Drain, TTL is used for this comparator.This device is designed in Tube case.It's a typical General Purpose comparator.This element consists of 2 elements in total.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .8 pins are present on the comparator.The comparator presents a quiescent current of 180μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 18μA .The compartator could be damaged if the current supply exceeds 18μA .Temperatures above 70°C are not recommended.A temperature lower than 0°C is unsuitable for the device.A comparator is designed to operate at a maximum supply voltage of 12V .The comparator is capable of operating at a minimum supply voltage of 3V .For the output to be of high quality, 2 channels must cooperate together.
ALD2301CSAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2301CSAL Applications
There are a lot of Advanced Linear Devices Inc.
ALD2301CSAL linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
