MAX9095ASD+T Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open Drain is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has14 terminals.Electronic comparator is a part of Comparators family.In general, the chip type can be classified as General Purpose .A total of 4 elements can be found in it.A Surface Mount mounting type is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 14 pins.Alternatively, you may search for MAX9095 to find more pin-to-pin solutions for your specific needs.There is 400μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The device can be run with 1.8/5V power supplies.Comparator electronics follows that the voltage gain of the part is 93.98dB .The part can be supplied with a minimum current of 0.5mA .
MAX9095ASD+T Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 400μA
Voltage Gain: 93.98dB
MAX9095ASD+T Applications
There are a lot of Maxim Integrated
MAX9095ASD+T linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
