ALD2301ASAL Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, NMOS, Open-Drain, TTL output type for this comparator.Electronic comparator is shipped by Tube .The type of the chip can be classified as General Purpose .Electronic comparator consists of 2 elements in total.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .As a result, this comparator displays a quiescent current of 180μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 18μA when using the device.A supply current exceeding 18μA may result in the comparator malfunctioning.Comparator electronics is not recommended to operate the system at a temperature above 70°C .Comparator electronics cannot be used at a temperature below 0°C .Comparator electronics is specified that the comparator's maximum supply voltage is 12V .A minimum supply voltage of 3V is permitted for this comparator.To ensure a high level of output quality, 2 channels work together.
ALD2301ASAL Features
CMOS, NMOS, Open-Drain, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2301ASAL Applications
There are a lot of Advanced Linear Devices Inc.
ALD2301ASAL linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
