XCR3256XL-10PQG208C Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As a result, it has 164 I/O ports programmed.The device is programmed with 208 terminations.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.It is packaged in the way of Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.FPGAs belonging to the CoolRunner XPLA3series contain this type of chip.It is programmed with 208 pins.The device can also be used to find [0].There are 6000 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].In this case, Surface Mountis used to mount the electronic component.There are 208 pins embedded in the device.There is a maximum supply voltage of 3.6V.In order for it to operate, a supply voltage of 3Vis required.It is recommended that the maximum frequency be less than 105MHz.There are 16 logic elements/cells to form a fundamental building block.
XCR3256XL-10PQG208C Features
208-BFQFP package
164 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins
XCR3256XL-10PQG208C Applications
There are a lot of Xilinx Inc. XCR3256XL-10PQG208C CPLDs applications.
- USB Bus
- Auxiliary Power Supply Isolated and Non-isolated
- Power automation
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Field programmable gate
- Configurable Addressing of I/O Boards
- Power Meter SMPS
- Synchronous or asynchronous mode
- PULSE WIDTH MODULATION (PWM)
- DDC INTERFACE
