XC95144XL-7TQ144I Overview
A mobile phone network consists of 144macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is contained in package [0].There are 117 I/Os on the board.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.A voltage of 3.3V is used as the power supply for this device.There is a part in the family [0].Ideally, the chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended that Surface Mountholds the chip in place.This type of FPGA is a part of the XC9500XL series.It is programmed with 144 pins.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.In digital circuits, there are 3200gates, which act as a basic building block.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.In general, it is recommended to store data in [0].It is mounted by Surface Mount.A maximum supply voltage of 3.6Vis used in its operation.With a minimal supply voltage of [0], it operates.It is important to make sure that the maximum frequency is less than 125MHz.A fundamental building block consists of 8logic elements/cells.
XC95144XL-7TQ144I Features
144-LQFP package
117 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
XC95144XL-7TQ144I Applications
There are a lot of Xilinx Inc. XC95144XL-7TQ144I CPLDs applications.
- Synchronous or asynchronous mode
- Power up sequencing
- Parity generators
- ROM patching
- Configurable Addressing of I/O Boards
- Field programmable gate
- Wide Vin Industrial low power SMPS
- Custom shift registers
- I/O expansion
- Timing control
