XC2C128-7VQ100I Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a 100-TQFP package containing it.There are 80 I/Os programmed in it.The device is programmed with 100 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 1.8V is used as the power supply for this device.This part is part of the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.As part of the CoolRunner IIseries, it is a type of FPGA.It is equipped with 100 pin count.This device is also capable of displaying [0].The XC2C128contains its related parts.There are 3000 gates, which are devices that acts as a building block for digital circuits. High efficiency requires a voltage supply of [0].It is recommended that data be stored in [0].This device is mounted by Surface Mount.The 100pins are designed into the board.Vsup reaches 1.9Vas the maximum supply voltage.It is important to make sure that the maximum frequency is less than 152MHz.In order to form a fundamental building block, there are 8 logic elements or cells.
XC2C128-7VQ100I Features
100-TQFP package
80 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
XC2C128-7VQ100I Applications
There are a lot of Xilinx Inc. XC2C128-7VQ100I CPLDs applications.
- Wide Vin Industrial low power SMPS
- I2C BUS INTERFACE
- DMA control
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- State machine control
- Address decoders
- INTERRUPT SYSTEM
- Reset swapping
- Page register
- Interface bridging
