XCR3512XL-10FTG256C Overview
512 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The device is programmed with 212 I/O ports.It is programmed to terminate devices at 256.There is a BOTTOM terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is a part of the family Programmable Logic Devices.With 256 pins programmed, the chip is ready to use.When using this device, YES is also available.12000 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 256.Initially, the maximum supply voltage (Vsup) is 3.6V.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 70°C.32 logic blocks (LABs) make up this circuit.If the maximal frequency is less than 97MHz, it should be lower than that.In programmable logic, a type of logic can be categorized as EE PLD.
XCR3512XL-10FTG256C Features
212 I/Os
256 pin count
256 pins
32 logic blocks (LABs)
XCR3512XL-10FTG256C Applications
There are a lot of Xilinx
XCR3512XL-10FTG256C CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
