XCR3256XL-10CS280C Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The device is programmed with 164 I/O ports.It is programmed to terminate devices at 280.There is a BOTTOM terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is a part of the family Programmable Logic Devices.With 280 pins programmed, the chip is ready to use.When using this device, YES is also available.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.The pins are 280.Initially, the maximum supply voltage (Vsup) is 3.6V.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 70°C.16 logic blocks (LABs) make up this circuit.If the maximal frequency is less than 105MHz, it should be lower than that.In programmable logic, a type of logic can be categorized as EE PLD.
XCR3256XL-10CS280C Features
164 I/Os
280 pin count
280 pins
16 logic blocks (LABs)
XCR3256XL-10CS280C Applications
There are a lot of Xilinx
XCR3256XL-10CS280C CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
