XC95144-7PQG160C Overview
144 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a PQFP package.The device is programmed with 133 I/O ports.It is programmed to terminate devices at 160.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 5V volts.It is a part of the family Programmable Logic Devices.With 160 pins programmed, the chip is ready to use.When using this device, YES is also available.If high efficiency is desired, the supply voltage should be kept at 5V.It is recommended that data be stored in FLASH.In this case, it is mounted by Surface Mount.The pins are 160.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.With a minimal supply voltage of 4.75V, it operates.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 70°C.8 logic blocks (LABs) make up this circuit.If the maximal frequency is less than 83.3MHz, it should be lower than that.
XC95144-7PQG160C Features
PQFP package
133 I/Os
160 pin count
160 pins
8 logic blocks (LABs)
XC95144-7PQG160C Applications
There are a lot of Xilinx
XC95144-7PQG160C CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
