W25X64VSFIG Overview
As far as its memory type goes, it falls into the Non-Volatile category. In addition, memory ics is available in a Tube case as well. 16-SOIC (0.295, 7.50mm Width) case encloses it. There is 64Mb 8M x 8 of memory on the chip. This device utilizes a FLASH format memory which is of mainstream design. Due to its extended operating temperature range, the device is well suited for a wide range of demanding applications. The supply voltage can be up to 2.7V~3.6V. It is recommended to mount it in the Surface Mount mounting type. There are 16 terminations on the chip. The comprehensive working procedure is supported by 1 functions in this part. An 3V supply is required for this ic memory chip to operate properly. It is important to note that the memory has a clock frequency rotation within the range of 75MHz. It is encased in an 16-pin package that contains this ic memory chip. It is worth noting that this memory device has 16 pins, which indicates it has 16 memory locations. This memory runs on an 3.3V operating supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. It is rated 18mA for its nominal supply current when it comes to the memory component. SpiFlash? series memory devices play an important role in the applications they target. It is helpful to carry data to the CPU using the SPI-type serial bus that this memory integrates with. A programming voltage of 2.7V is needed to alter the state of certain nonvolatile memory arrays.
W25X64VSFIG Features
Package / Case: 16-SOIC (0.295, 7.50mm Width)
16 Pins
Operating Supply Voltage:3.3V
W25X64VSFIG Applications
There are a lot of Winbond Electronics W25X64VSFIG Memory applications.
- embedded logic
- main computer memory
- workstations,
- servers
- personal digital assistants
- Cache memory
- cell phones
- networking
- eDRAM
- personal computers
