W25X32VSFIG Overview
A Non-Volatile-type memory can be classified as the memory type of this device. There is a Tube case available. The 16-SOIC (0.295, 7.50mm Width) case contains it. A memory chip with a capacity of 32Mb 4M x 8 is used on this device. In this device, the memory is of the FLASH-format, which is a popular format in the mainstream computing sector. This device has an extended operating temperature range of -40°C~85°C TA, so it's perfect for a wide range of demanding applications. It is supplied votage within 2.7V~3.6V. The recommended mounting type for memory ics is Surface Mount. It is planted on the chip with 16 terminations. In total, 1 functions are supported by this part. A voltage of 3V is required for the operation of this memory device. In this memory, the clock frequency rotation is within an 75MHz range. The ic memory chip comes in a package with 16 pins that allows it to be connected to a computer. The memory device in question has 16 pins, thus indicating that it has 16 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. This chip is configured to use Surface Mount mounting, a straight forward, high-efficiency mounting fashion. There is a nominal supply current rating of 18mA for this memory component. This part, which belongs to the SpiFlash? series of memory devices, plays an important role in its target applications. By integrating this memory with a SPI-type serial bus, data can be carried and transferred to the CPU easily. A programming voltage of 2.7V is required to change a nonvolatile memory array's state.
W25X32VSFIG Features
Package / Case: 16-SOIC (0.295, 7.50mm Width)
16 Pins
Operating Supply Voltage:3.3V
W25X32VSFIG Applications
There are a lot of Winbond Electronics W25X32VSFIG Memory applications.
- cell phones
- networking
- main computer memory
- printers
- eSRAM
- mainframes
- servers
- supercomputers
- personal computers
- hard disk drive (HDD)
