W25X16AVSSIG Overview
Its memory type can be classified as Non-Volatile. The case comes in Tube size. The 8-SOIC (0.209, 5.30mm Width) case contains it. It is estimated that the memory size on the chip is 16Mb 2M x 8. As with most mainstream devices, this one uses FLASH-format memory. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. The device is capable of handling a supply voltage of 2.7V~3.6V volts. The recommended mounting type for this device is Surface Mount. 8 terminations are planted on the chip. The comprehensive working procedure is supported by 1 functions in this part. There is a requirement for 3V to be supplied to this ic memory chip in order to operate. In this memory, the clock frequency rotation is within an 75MHz range. There are 8 pins on the package of the memory device. It has 8 pins indicating it has 8 memory locations. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. As far as the nominal supply current of this memory component is concerned, it is rated at 20mA. In its target applications, this memory ics plays an important role as a member of the SpiFlash? series of memory devices. The SPI type serial bus this memory integrates with is helpful to carry and transfer data to the CPU. A programming voltage of 2.7V is required to change a nonvolatile memory array's state.
W25X16AVSSIG Features
Package / Case: 8-SOIC (0.209, 5.30mm Width)
8 Pins
Operating Supply Voltage:3.3V
W25X16AVSSIG Applications
There are a lot of Winbond Electronics W25X16AVSSIG Memory applications.
- personal digital assistants
- eSRAM
- Camcorders
- hard disk drive (HDD)
- servers
- networks
- cell phones
- DVD disk buffer
- personal computers
- networking
