W25X10CLSNIG Overview
In terms of its memory type, it can be classified as Non-Volatile. Case Tube is available. The file is embedded in a 8-SOIC (0.154, 3.90mm Width) case. The memory size of the chip is 1Mb 128K x 8 Mb. The device uses a mainstream FLASH-format memory. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. There is a voltage range of 2.3V~3.6V for the supply voltage. Its recommended mounting type is Surface Mount. The chip contains 8 terminations. In total, 1 functions are supported by this part. A voltage of 3V is required for the operation of this memory device. The memory has a clock frequency rotation within 104MHz. This memory device is enclosed in a 8-pin package. There are 8 pins on this memory device, which indicates it has 8 memory locations in it. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. In terms of its nominal supply current, this memory component has a rating of 14mA. This memory chip requires only 2.5/3.3V of power. In its target applications, this memory ics plays an important role as a member of the SpiFlash? series of memory devices. By integrating with the SPI-type serial bus, this memory transmits data to the processor. It is necessary to apply 3V programming voltage to certain nonvolatile memory arrays in order to change their state.
W25X10CLSNIG Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
W25X10CLSNIG Applications
There are a lot of Winbond Electronics W25X10CLSNIG Memory applications.
- supercomputers
- DVD disk buffer
- data buffer
- networking
- Camcorders
- eSRAM
- servers
- eDRAM
- cell phones
- telecommunications
