W25Q32FVDAIG Overview
As far as its memory type goes, it falls into the Non-Volatile category. Tube-cases are available. As you can see, it is embedded in 8-DIP (0.300, 7.62mm) case. 32Mb 4M x 8 is the chip's memory size. FLASH-format memory is used in this device, which is a mainstream design. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. A voltage of 2.7V~3.6V can be supplied to memory ics. It is recommended to mount it in the Through Hole mounting type. 8 terminations are planted on the chip. The comprehensive working procedure of this part involves 1 functions. A voltage of 3V is required for the operation of this memory device. It is important to note that the memory has a clock frequency rotation within the range of 104MHz. In terms of power requirements, this memory chip uses only 3/3.3V . In its target applications, this memory ics plays an important role as a member of the SpiFlash? series of memory devices. By integrating with the SPI-type serial bus, this memory transmits data to the processor. This memory ics is capable of operating with an input current of 0.02mA at max. A programming voltage of 2.7V is required to change a nonvolatile memory array's state.
W25Q32FVDAIG Features
Package / Case: 8-DIP (0.300, 7.62mm)
W25Q32FVDAIG Applications
There are a lot of Winbond Electronics W25Q32FVDAIG Memory applications.
- main computer memory
- DVD disk buffer
- embedded logic
- cell phones
- eDRAM
- personal computers
- data buffer
- Cache memory
- hard disk drive (HDD)
- networking
