Name: DG9414DQ-T1-E3
Brand: Vishay Siliconix
SKU: DG9414DQ-T1-E3
Availability: InStock

new-10%

DG9414DQ-T1-E3

Manufacturer part number:DG9414DQ-T1-E3

Manufacturer:Vishay Siliconix

Description:55ns, 40ns SP4T 17Ohm DUAL Analog Switches DG9414 10 Pins 1nA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:DG9414DQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Weight	143.193441mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2015
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	17Ohm
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG9414
Pin Count	10
Operating Supply Voltage	5V
Number of Channels	4
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Propagation Delay	128 ns
Turn On Delay Time	125 ns
Logic Function	Multiplexer
Number of Inputs	4
Supply Type	Single
Turn-Off Delay Time	68 ns
On-State Resistance (Max)	17Ohm
High Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	10pF 24pF
On-state Resistance Match-Nom	3Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	55ns, 40ns
Charge Injection	13pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-64dB @ 1MHz
Switch-off Time-Max	75ns
Voltage - Supply, Single (V+)	2.7V~12V
Drain to Source Resistance	17Ohm
Signal Current-Max	0.02A
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG9414DQ-T1-E3 Product Details

DG9414DQ-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. Totally, there are 10 terminations. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. An injection of 10 pins is performed into the body of the electrical component. The analog switch ics are built using SP4T switching circuits. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with DG9414 if you are looking for variants. Analog switches have 17Ohm internal resistance. For details about the functions of 10 pins, please refer to the datasheets. Multiplexers should not be powered above 12V in normal situations. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. This digital switch can be operated with a current of 1μA. This analogue multiplexer requires a voltage of 2.7V~12V when it drains from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. The electrical part can be operated at 5V voltage levels. A 4 input needs to be operated. There is 17Ohm resistance between Drain and Source for this electronic part.