DG722DN-T1-GE4 Overview
Due to its 8-UFDFN Exposed Pad packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~85°C TA. There are 8 terminations totally. The electronic part provides high-quality output because it has 1 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 8 series. Multiplexers built on a SPST - NC switching circuit are built. It consists of 2 circuits. This digital multiplexer has 4.5Ohm internal resistance. You can find the functions of the 8 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Single supply type. 1.8V is the lowest voltage that should be fed to the electronic electronic part. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. A voltage higher than 2μA may cause damage to the switch multiplexer. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Additional features include: VIDEO APPLICATION.
DG722DN-T1-GE4 Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 366MHz
Additional Features: VIDEO APPLICATION
DG722DN-T1-GE4 Applications
There are a lot of Vishay Siliconix DG722DN-T1-GE4 Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Remote Powered Equipment
- Data Acquisition Systems
- Avionics test equipment
- Audio and video routing
- Digital access cross connects
- Frame Relay Equipment
- PDAs
- Automatic test equipment
- Private Branch Exchange (PBX)
