Name: DG642DY
Brand: Vishay Siliconix
SKU: DG642DY
Availability: InStock

new-10%

DG642DY

Manufacturer part number:DG642DY

Manufacturer:Vishay Siliconix

Description:100ns, 60ns SPDT 8Ohm Analog Switches 10nA 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG642DY Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Supplier Device Package	8-SOIC
Weight	142.994995mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	8Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	300mW
Number of Outputs	2
Operating Supply Voltage	15V
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	18V
Min Supply Voltage	10V
Operating Supply Current	20μA
Power Dissipation	300mW
Max Supply Current	6mA
Turn On Delay Time	100 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	3V~15V ±3V~15V
Supply Type	Single
Bandwidth	500MHz
Turn-Off Delay Time	60 ns
Max Dual Supply Voltage	15V
-3db Bandwidth	500MHz
On-State Resistance (Max)	8Ohm
Min Dual Supply Voltage	10V
Dual Supply Voltage	12V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	20pF 20pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	100ns, 60ns
Charge Injection	40pC
Channel-to-Channel Matching (ΔRon)	500mOhm
Crosstalk	-85dB @ 5MHz
Drain to Source Resistance	8Ohm
Height	1.55mm
Length	5mm
Width	4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

DG642DY Product Details

DG642DY Overview

Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. A 1 channel electronic part produces high-quality output. A SPDT switching circuit is used for these analog switches. The multiplexer consists of 1 circuits. In this multiplexer, the internal resistance is 8Ohm. The functions of 8 pins can be found in the datasheets. Multiplexers should not be powered above 18V in normal situations. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 10V should be applied to the electronic component. For this digital switch to work, 20μA current would suffice. If you put voltage higher than 6mA on the digital multiplexer, damage may occur. If put voltage greater than 15V on the multiplexer, damage may be caused to the device. You should attach at least 10V voltage if you are using dual power supply. This electrical part is compatible with 15V operating voltages. In order to operate the 1 inputs, there are several steps to follow. A 500MHz-bandwidth can be used for data transfer. An environment with a temperature greater than 85°C should not be used to operate the digital switches. There is 8Ohm Drain to Source resistance on this electronic part. This digital multiplexer has 2 outputs. Suppliers offer a 8-SOIC package.