Name: DG641DY-T1-E3
Brand: Vishay Siliconix
SKU: DG641DY-T1-E3
Availability: InStock

new-10%

DG641DY-T1-E3

Manufacturer part number:DG641DY-T1-E3

Manufacturer:Vishay Siliconix

Description:70ns, 50ns SPST - NO 15Ohm Analog Switches BREAK-BEFORE-MAKE DG641 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG641DY-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	15Ohm
Terminal Finish	MATTE TIN
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	1.27mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG641
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Power Supplies	15-3V
Number of Channels	4
Max Supply Voltage	18V
Min Supply Voltage	10V
Analog IC - Other Type	AUDIO/VIDEO SWITCH
Operating Supply Current	3.5mA
Nominal Supply Current	3.5mA
Power Dissipation	600mW
Max Supply Current	6mA
Throw Configuration	SPST
Turn On Delay Time	70 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3V~15V ±3V~15V
Supply Type	Dual, Single
Bandwidth	500MHz
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	15V
On-State Resistance (Max)	15Ohm
Min Dual Supply Voltage	10V
Dual Supply Voltage	12V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	70ns, 50ns
Charge Injection	19pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-87dB @ 5MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	85ns
Normal Position	NO
Height	1.55mm
Length	10mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG641DY-T1-E3 Product Details

DG641DY-T1-E3 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. By its 4 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with DG641. This digital multiplexer has 15Ohm internal resistance. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 18V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 10V. 3.5mA current would be enough for this multiplexer to operate. If put voltage greater than 6mA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 15V. You should attach at least 10V voltage if you are using dual power supply. Integrated with AUDIO/VIDEO SWITCH analog IC. This analog switch ic utilizes SEPARATE OUTPUT output. The electronic component can function from 15V. The electrical component supports 4 inputs. This switch operates within the bandwidth of 500MHz. Don’t miss additional features of the electronic component such as: VIDEO APPLICATION.