Name: DG612AEQ-T1-E3
Brand: Vishay Siliconix
SKU: DG612AEQ-T1-E3
Availability: InStock

new-10%

DG612AEQ-T1-E3

Manufacturer part number:DG612AEQ-T1-E3

Manufacturer:Vishay Siliconix

Description:55ns, 35ns SPST - NO 115Ohm Analog Switches BREAK-BEFORE-MAKE DG612 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:DG612AEQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	72Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATE WITH 5V AND 3V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DG612
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Power Dissipation	450mW
Max Supply Current	100μA
Throw Configuration	SPST
Turn On Delay Time	55 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.7V~5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-3V
Turn-Off Delay Time	35 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	720MHz
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2pF 3pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	55ns, 35ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-90dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Switch-off Time-Max	50ns
Normal Position	NO
Height	920μm
Length	5.08mm
Width	4.4mm
RoHS Status	ROHS3 Compliant

DG612AEQ-T1-E3 Product Details

DG612AEQ-T1-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~125°C TA. 16 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. It is part of the design of the 16 series that this electronic component is included. The analog switch ics are built using SPST - NO switching circuits. Try searching for the analog switch ic with DG612 if you are looking for variants. In this multiplexer, the internal resistance is 72Ohm. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users should never supply a voltage higher than 12V to a switch device. Dual, Single supply type digital switch with a low cost. It is recommended to use 2.7V as the lowest voltage for the electrical part. An operating current of 1μA would be sufficient for this switch device. When the digital multiplexer is charged above 100μA, damage can occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. A dual power supply should have at least 2.7V voltage attached. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It is possible to operate 4 inputs. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATE WITH 5V AND 3V SUPPLY.