DG611AEY-T1-E3 Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Look for analog switch ic variants by searching with DG611. A 72Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2.7V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 1μA current. A voltage higher than 100μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 5VFor dual power supplies, a voltage of at least 2.7V should be attached. Among the inputs that can be operated are the 4 inputs.
DG611AEY-T1-E3 Features
Switch Circuit: SPST - NC
1μA Supply Current
-3db Bandwidth: 720MHz
DG611AEY-T1-E3 Applications
There are a lot of Vishay Siliconix
DG611AEY-T1-E3 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
