DG508BEQ-T1-E3 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. This electronic part can be found in the 16 series. The circuits in this analogue multiplexer number 1. Try searching with DG508 if you're looking for variants. In this multiplexer, the internal resistance is 500Ohm. Datasheets for functions of 16 pins are available. It is normally recommended that users do not supply the multiplexer with voltages higher than 44V. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 12V. For this digital switch to work, 500μA current would suffice. If put voltage greater than -200μA on the device, damage may be caused to the analogue multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. You should attach at least 5V voltage if you are using dual power supply. A voltage of 15V can be used to operate the electronic component. There are 8 inputs to be operated. 250MHz bandwidths enable data to be transferred.
DG508BEQ-T1-E3 Features
8 Channels
500μA Supply Current
Bandwidth: 250MHz
DG508BEQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG508BEQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Medical systems
- Ultrasound
- Audio/video switches
- E1 Multiplexer
- Wireless Local Loop
- Communication systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Data Acquisition Systems
- SDH
