Name: DG459DJ
Brand: Vishay Siliconix
SKU: DG459DJ
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Supplier Device Package	16-PDIP
Weight	1.627801g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2014
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	1.5kOhm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	1W
Operating Supply Voltage	15V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	13V
Max Supply Current	100μA
Propagation Delay	500 ns
Turn On Delay Time	250 ns
Supply Type	Dual, Single
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	1.5kOhm
Min Dual Supply Voltage	7V
Multiplexer/Demultiplexer Circuit	4:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 10pF
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	250ns, 250ns
Channel-to-Channel Matching (ΔRon)	90Ohm
Drain to Source Resistance	1.2kOhm
Voltage - Supply, Dual (V±)	±4.5V~18V
Height	3.81mm
Length	21.33mm
Width	7.11mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

DG459DJ Product Details

DG459DJ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. A electrical component with 2 channels is capable of high-quality output. SP4T switching circuits are used in these analog switch ics. 2 circuits are used in this analogue multiplexer. This digital multiplexer has 1.5kOhm internal resistance. For functions related to 16 pins, please refer to the datasheets. Users should never supply a voltage higher than 36V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. 13V should be the lowest voltage fed to the electronic component. Put voltage above 100μA on the multiplexer to cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. If you are using dual power supplies, you should attach at least 7V. The electrical part can be operated at 15V voltage levels. Temperatures above 85°C should not be used to operate the switches. The Drain to Source resistance of this electronic component is 1.2kOhm. It is offered by suppliers in package 16-PDIP.