DG4599DL-T1-E3 Overview
Packed in 6-TSSOP, SC-88, SOT-363, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 6 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. 6 pins are injected to the electronic part body. A SPDT switching circuit is used to build these analog multiplexers. Look for analog switch ic variants by searching with DG4599. It has an internal resistance of 60Ohm. Datasheets for 6 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Single supply. The lowest voltage the electronic part should receive is 2.25V. For this digital switch to work, 10nA current would suffice. Draining from a single voltage supply, this analog switch requires a voltage of 2.25V~5.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. A 1 input needs to be operated. Multiplexer ics with 2 outputs are available.
DG4599DL-T1-E3 Features
1 Channels
Switch Circuit: SPDT
10nA Supply Current
DG4599DL-T1-E3 Applications
There are a lot of Vishay Siliconix DG4599DL-T1-E3 Analog Switches & Multiplexers ICs applications.
- Communications systems
- Remote wireless modules
- Audio/video switches
- Relay replacements
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Battery Powered Instruments
- Data Acquisition Systems
- PBX interfaces
- Transmit
- Cell phones
