Name: DG444BDY-E3
Brand: Vishay Siliconix
SKU: DG444BDY-E3
Price: 1.69000 USD
Availability: InStock

new-10%

DG444BDY-E3

Manufacturer part number:DG444BDY-E3

Manufacturer:Vishay Siliconix

Description:300ns, 200ns SPST - NC 80Ohm Analog Switches BREAK-BEFORE-MAKE DG444 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG444BDY-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	13 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	665.986997mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	160Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DG444
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	5μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	300 ns
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	200 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	80Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	300ns, 200ns
Charge Injection	1pC
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG444BDY-E3 Product Details

DG444BDY-E3 Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. Into the electrical component body are injected 16 pins. SPST - NC switching circuits are used in these analog switch ics. There are 4 circuits in this multiplexer. Try searching for the analog switch ic with DG444 if you are looking for variants. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 36V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 13V. For this digital switch to work, 5μA current would suffice. A voltage higher than 1μA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 7V to your dual power supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.