Name: DG441BDJ
Brand: Vishay Siliconix
SKU: DG441BDJ
Availability: InStock

new-10%

DG441BDJ

Manufacturer part number:DG441BDJ

Manufacturer:Vishay Siliconix

Description:220ns, 120ns SPST - NC 80Ohm Analog Switches BREAK-BEFORE-MAKE DG441 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:DG441BDJ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2015
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	80Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	15V
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	DG441
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	25V
Min Supply Voltage	13V
Max Supply Current	1μA
Turn On Delay Time	300 ns
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	200 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	80Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	4pF 4pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	220ns, 120ns
Charge Injection	-1pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	220ns
Switch-off Time-Max	120ns
Normal Position	NC
Height Seated (Max)	5.08mm
Length	20.13mm
Width	7.62mm
RoHS Status	ROHS3 Compliant

DG441BDJ Product Details

DG441BDJ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 16 terminations. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. The electronic part body is injected with 16 pins. Unlike digital switches, these are based on SPST - NC switching circuits. There are 4 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with DG441. There is 80Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. Analog switch ics with Dual, Single supply type are cost-effective. It is recommended that the electrical component receives a voltage of 13V. The analogue multiplexer may be damaged if voltage is greater than 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.