Name: DG419BDJ-E3
Brand: Vishay Siliconix
SKU: DG419BDJ-E3
Availability: InStock

new-10%

DG419BDJ-E3

Manufacturer part number:DG419BDJ-E3

Manufacturer:Vishay Siliconix

Description:89ns, 80ns SPDT 25Ohm Analog Switches BREAK-BEFORE-MAKE DG419 8 Pins 250pA 15V 8-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:DG419BDJ-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	930.006106mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	35Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	400mW
Technology	CMOS
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	2.54mm
Base Part Number	DG419
Pin Count	8
Operating Supply Voltage	20V
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	1μA
Max Supply Current	1μA
Turn On Delay Time	89 ns
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	80 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	25Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	82 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	12pF 12pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	89ns, 80ns
Charge Injection	38pC
Crosstalk	-88dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height	3.81mm
Length	10.92mm
Width	7.11mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG419BDJ-E3 Product Details

DG419BDJ-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 8 terminations. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. There is an electrical component included in the 8 series. Multiplexers built on a SPDT switching circuit are built. A total of 1 circuits make up this switch device. DG419 can be used to search for analog multiplexer variants. This digital multiplexer has 35Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 36V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 13V. The analogue multiplexer could operate on 1μA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. For dual power supplies, a voltage of at least 7V should be attached. Operating voltages range from 20V.