DG418DY-T1 Overview
Due to its 8-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. There is an electrical component included in the 8 series. Unlike digital switches, these are based on SPST - NO switching circuits. This digital multiplexer has 35Ohm internal resistance. To find out what the 8 pins do, please refer to the datasheets. A voltage higher than 36V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 13V. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. In the case of dual power supplies, you should connect at least 7V. There are 1 inputs to be operated.
DG418DY-T1 Features
Switch Circuit: SPST - NO
DG418DY-T1 Applications
There are a lot of Vishay Siliconix DG418DY-T1 Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Industrial control systems
- PBX interfaces
- Access Concentrators
- Precision test equipment
- Industrial
- DSUs
- HDTV
- Remote Powered Equipment
- Multi-Line E1 Interface Cards
