Name: DG408DQ-T1-E3
Brand: Vishay Siliconix
SKU: DG408DQ-T1-E3
Price: 3.42000 USD
Availability: InStock

new-10%

DG408DQ-T1-E3

Manufacturer part number:DG408DQ-T1-E3

Manufacturer:Vishay Siliconix

Description:150ns, 150ns 100Ohm Analog Switches BREAK-BEFORE-MAKE DG408 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:DG408DQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	15 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	DG408
Pin Count	16
Operating Supply Voltage	36V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	44V
Min Supply Voltage	13V
Operating Supply Current	1μA
Nominal Supply Current	10μA
Power Dissipation	600mW
Max Supply Current	500μA
Propagation Delay	160 ns
Turn On Delay Time	150 ns
Logic Function	Multiplexer
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	3pF 26pF
On-state Resistance Match-Nom	15Ohm
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	15 Ω (Max)
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.02A
Height	920μm
Length	5.07mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG408DQ-T1-E3 Product Details

DG408DQ-T1-E3 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. By its 8 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with DG408. This digital multiplexer has 100Ohm internal resistance. Please refer to the datasheets for 16 pins functions. In a normalsituation, users should not supply the switches with voltage higher than 44V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 13V. 1μA current would be enough for this multiplexer to operate. If put voltage greater than 500μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 5V voltage if you are using dual power supply. The electronic component can function from 36V.