DG4051AEQ-T1-E3 Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. 8:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 8 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. An electrical component of this type can be found in the 16 series. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with DG4051. A 100Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. normally, users should not supply switches with voltages higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. It would be sufficient to run this analogue multiplexer with -1μA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. There is no problem with using dual supply voltage, but it should not exceed 5V. In the case of dual power supplies, you should connect at least 2.5V. A 8 input needs to be operated. In 730MHz-bandwidths, data can be transferred.
DG4051AEQ-T1-E3 Features
8 Channels
-1μA Supply Current
-3db Bandwidth: 330MHz
Bandwidth: 730MHz
DG4051AEQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG4051AEQ-T1-E3 Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Cell phones
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Relay replacements
- Automatic test equipment
- Mechanical reed relay replacement
- USB 1.1 signal switching circuits
- SDH
- E1 Network Equipment
