Name: DG309DY-E3
Brand: Vishay Siliconix
SKU: DG309DY-E3
Price: 2.84000 USD
Availability: InStock

new-10%

DG309DY-E3

Manufacturer part number:DG309DY-E3

Manufacturer:Vishay Siliconix

Description:200ns, 150ns SPST - NC 85Ohm Analog Switches BREAK-BEFORE-MAKE DG309 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG309DY-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	13 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2008
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	100Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG309
Pin Count	16
JESD-30 Code	R-PDSO-G16
Operating Supply Voltage	15V
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	10μA
Nominal Supply Current	1nA
Max Supply Current	10μA
Throw Configuration	SPST
Turn On Delay Time	200 ns
Voltage - Supply, Single/Dual (±)	4V~44V ±4V~22V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	7V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	78 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1.7 Ω
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

DG309DY-E3 Product Details

DG309DY-E3 Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NC switching circuits. This multiplexer is composed of 4 circuits. If you are looking for variants of the digital switch, trying search with DG309. This digital multiplexer has 100Ohm internal resistance. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 36V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 13V. 10μA current would be enough for this multiplexer to operate. If put voltage greater than 10μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. You should attach at least 7V voltage if you are using dual power supply. The electronic component can function from 15V.