DG3002DB-T1-E1 Overview
Packed in 6-WFBGA, the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Total terminations are 6. A electrical component with 1 channels is capable of high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. It is part of the design of the 6 series that this electronic component is included. Multiplexers built on a SPST - NC switching circuit are built. A total of 1 circuits make up this switch device. DG3002 can be used to search for analog multiplexer variants. A 700mOhm internal resistance characterizes this multiplexer. Please refer to the datasheets for 6 pins functions. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Analog switch ics with Single supply type are cost-effective. 1.8V is the lowest voltage the electrical component should receive. An operating current of 100nA would be sufficient for this switch device. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 1μA.
DG3002DB-T1-E1 Features
1 Channels
Switch Circuit: SPST - NC
100nA Supply Current
DG3002DB-T1-E1 Applications
There are a lot of Vishay Siliconix DG3002DB-T1-E1 Analog Switches & Multiplexers ICs applications.
- Medical
- Cellular phones
- Switching Systems
- PDH Multiplexers
- DVD-R
- Audio and video signal routing
- Data Acquisition Systems
- Fiber In The Loop (FITL)
- New designs requiring multiplexer functions
- Automatic test equipment
