Name: DG2741DQ-T1-E3
Brand: Vishay Siliconix
SKU: DG2741DQ-T1-E3
Availability: InStock

new-10%

DG2741DQ-T1-E3

Manufacturer part number:DG2741DQ-T1-E3

Manufacturer:Vishay Siliconix

Description:30ns, 28ns SPST - NO 800mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2741 8 Pins 1nA 1.8V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Case Package:SOT-23

Datasheet:DG2741DQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	8Ohm
Terminal Finish	MATTE TIN
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DG2741
Output	SEPARATE OUTPUT
Pin Count	8
Qualification Status	Not Qualified
Operating Supply Voltage	3V
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.5V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	45 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	40 ns
On-State Resistance (Max)	800mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	81pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 28ns
Charge Injection	5.8pC
Crosstalk	-89dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	50ns
Voltage - Supply, Single (V+)	1.5V~3.6V
Normal Position	NO
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

DG2741DQ-T1-E3 Product Details

DG2741DQ-T1-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. 8 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. There are 8 pins injected into the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with DG2741 if you're looking for variants. There is 8Ohm internal resistance in this digital multiplexer. To find out what the 8 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.5V. This multiplexer would work with 10nA current. An analogue multiplexer drains from a single voltage supply at 1.5V~3.6V. A digital multiplexer may suffer damage if voltage is applied above 1μA. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Operating voltages range from 3V. Operating the 2 inputs requires 2 inputs. This electrical component also includes additional features such as VIDEO APPLICATION.