Name: DG2037DQ-T1-E3
Brand: Vishay Siliconix
SKU: DG2037DQ-T1-E3
Availability: InStock

new-10%

DG2037DQ-T1-E3

Manufacturer part number:DG2037DQ-T1-E3

Manufacturer:Vishay Siliconix

Description:30ns, 22ns SPST - NO 5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2037 8 Pins 1nA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Case Package:SOT-23

Datasheet:DG2037DQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	320mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	DG2037
Output	SEPARATE OUTPUT
Pin Count	8
Power Supplies	3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	20nA
Nominal Supply Current	20nA
Power Dissipation	320mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	35 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	31 ns
On-State Resistance (Max)	5Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	61 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	15pF 17pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 22ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	200m Ω (Max)
Crosstalk	-67dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	40ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	2.5Ohm
Normal Position	NO
Height Seated (Max)	1.1mm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG2037DQ-T1-E3 Product Details

DG2037DQ-T1-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 8. A 1 channel electronic part produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. This electronic part can be found in the 8 series. Multiplexers built on a SPST - NO switching circuit are built. Look for analog switch ic variants by searching with DG2037. There is 5Ohm internal resistance in this digital multiplexer. The datasheets for the 8 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 1.8V. An operating current of 20nA would be sufficient for this switch device. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 1μA on the multiplexer may cause damage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. It is possible to operate 2 inputs. Drain to Source resistance for this electronic component is 2.5Ohm.