Name: DG2016DQ-T1-E3
Brand: Vishay Siliconix
SKU: DG2016DQ-T1-E3
Availability: InStock

new-10%

DG2016DQ-T1-E3

Manufacturer part number:DG2016DQ-T1-E3

Manufacturer:Vishay Siliconix

Description:48ns, 33ns SPDT 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2016 10 Pins 1nA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:DG2016DQ-T1-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	4Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	320mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DG2016
Pin Count	10
Number of Outputs	4
Power Supplies	3/5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Power Dissipation	320mW
Max Supply Current	1μA
Turn On Delay Time	35 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	38 ns
On-State Resistance (Max)	4Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	78 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	14pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	48ns, 33ns
Charge Injection	79pC
Crosstalk	-82dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	59ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	2.4Ohm
Height	950μm
Length	3mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

DG2016DQ-T1-E3 Product Details

DG2016DQ-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 10 terminations. A electrical component with 1 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. There are 10 pins injected into the electronic part body. Unlike digital switches, these are based on SPDT switching circuits. Use DG2016 to search for variants of the digital switches. A 4Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 10 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.8V. It would be sufficient to run this analogue multiplexer with 10nA current. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. The electrical component supports 2 inputs. There is 2.4Ohm resistance between the Drain and Source on this part. In this digital multiplexer, there are 4 outputs.