Name: DG200BDJ-E3
Brand: Vishay Siliconix
SKU: DG200BDJ-E3
Availability: InStock

new-10%

DG200BDJ-E3

Manufacturer part number:DG200BDJ-E3

Manufacturer:Vishay Siliconix

Description:300ns, 200ns SPST - NC 85Ohm Analog Switches BREAK-BEFORE-MAKE DG200 14 Pins 2nA 15V 14-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:DG200BDJ-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Weight	1.620005g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	85Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Number of Functions	2
Supply Voltage	15V
Base Part Number	DG200
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	15V
Number of Channels	1
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	50μA
Nominal Supply Current	50μA
Power Dissipation	470mW
Max Supply Current	50μA
Throw Configuration	SPST
Turn On Delay Time	1 μs
Number of Inputs	2
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	425 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	85Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	300ns, 200ns
Charge Injection	1pC
Crosstalk	-95dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	1000ns
Normal Position	NC
Voltage - Supply, Dual (V±)	±15V
Height	3.81mm
Length	19.3mm
Width	7.11mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG200BDJ-E3 Product Details

DG200BDJ-E3 Overview

Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A total of 14 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. Electronic part bodies are injected with 14 pins. SPST - NC switching circuits are used in these analog switch ics. DG200 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 85Ohm. You can find the functions of the 14 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Digital switch that provides Dual power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 13V. The switch device would be able to operate with 50μA current. It may damage the digital multiplexer if the voltage is higher than 50μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. If you are using a dual power supply, you should attach at least 7V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. It can operate from 15V operating voltages. Operating 2 inputs is required.