B2M-E3/45 Overview
There are no pins on rectifier.When the forward voltage is set to 500mA, the device operates.There are a number of related parts that can be identified using the base part number B2.Basically, it's an electronic component with a 4-DIP (0.200, 5.08mm) package.Bridge rectifier is important to monBridge rectifieror the reverse leakage current and not allow Bridge rectifier to exceed 5μA.Through Hole represents the mounting method.At -55°C~150°C TJ, it operates normally.Bridge rectifier can support a maximum output voltage of 0.5A.The surge current should be monitored and should not exceed zero.A peak reverse voltage of 0 is used to power this device.
B2M-E3/45 Features
4 pin count
500mA forward voltage
forward voltage of 500mA
4-DIP (0.200, 5.08mm) package
operating at a temperature of -55°C~150°C TJ
the maximum output voltage of 0.5A
peak reverse voltage of 5μA
a reverse voltage peak of 5μA
B2M-E3/45 Applications
There are a lot of Vishay Semiconductor Diodes Division B2M-E3/45 applications of bridge rectifiers.
- Electroplating systems – Input SCRs and output rectifiers
- High forward surge current capability
- Extremely robust construction
- Supplies for DC power equipment
- Wind power (alternative energy) – Converters available as diodes, SCRs or IGBTs
- Crowbar systems for motor drives
- Inductive heating – Input rectifiers
- Uninterruptible power supplies – SCR transfer switches and input rectifiers
- Working peak reverse voltages 200 to 1 ,000 volts
- Welding equipment
