OPF432 Overview
A Bulk package protects these photodiodes from damage. In order to ensure their safety, the photodiodes are packaged into TO-46-3 packages. A photodiode can withstand a maximum voltage of 100V when operating in reverse-bias mode continuously. Reverse-bias photodiodes should not be operated above 100V permanently. A photodiode is equipped with 3 pins. A circuit made up of photodiodes could release heat 200mW. While operating photodiodes, the temperature should not exceed 100°C. However, the minimum operating temperature for the photodiodes should be set at -40°C. It is recommended that the reverse anode voltage on the photodiodes be 100V. As a result of reverse bias, the photodiodes could produce voltages of 100V. Without light input, a photodiode will produce 100pA current.
OPF432 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Panel, Through Hole
Spectral Range: 500nm ~ 1100nm
OPF432 Applications
There are a lot of TT Electronics/Optek Technology
OPF432 Photodiodes applications.
- Vision Controls
- Measurement Levelling
- High speed photo detectors
- Health Monitoring
- Heart Rate Monitoring
- Pulse Oximetry
- Pure UV-C Monitoring
- Sterilization Lamp Monitoring
- Optical Analytics
- Optical Switches
